Vanmac to showcase quality contour cutting

Vanmac to showcase quality contour cutting: As restrictions on curative chemistries continue to pose a challenge to course managers, it is now more critical than ever that every operation conducted above ground has plant health at its core.

As the most regular task, mowing can have either a positive or negative impact on the plant depending on whether the correct cutting performance can be attained. This will be the focus for Vanmac as they return to BTME in 2023, showcasing a range of rotary and multi-deck mowers from Progressive that offer industry-leading cut quality and contour-following ability.

Vanmac to showcase quality contour cutting

Vanmac to showcase quality contour cutting

The Progressive TDR-X features three independently floating decks which promise to closely follow undulations without the risk of scalping – thereby reducing the risk of creating entry points for pathogens to take hold. A 3.2m cutting width and easily adjustable cutting height range of between 10mm and 85mm gives complete versatility for use on both fine and sports turf surfaces, with full width rollers on both the front and rear of each deck leaving a first-class finish.

Along with other machines in the Progressive range, the TDR-X features Pro Lift-N-Turn™ technology, which enables the operator to temporarily lift the decks with the PTO still engaged, increasing manoeuvrability and overall productivity.

The TDR-X will be on show on stand 526 alongside the Pro-Flex 120 – the most widely used trailed contour finishing mower. The Pro-Flex is ideal for producing a fine finish on fairways and surrounds, featuring a high blade tip speed and graduated cut height options down to 25mm for uniformity of cut and unbeatable versatility. Totalling 3m in width, each of the three decks is equipped with a shock absorber to tackle cutting tasks on even the toughest, uneven ground.

If it’s cut and collect on the agenda, then Vanmac have that covered too with the Trilo range of multi-purpose collector units. The Trilo M4 can be configured with a variety of shaft options – including a choice of flail rotor styles – and features a powerful fan to lift the mown material up into the 4m3 hopper, leaving a clean finish after a single pass. Scarifier and brush shafts are also available for the M-Series to complete tasks across the full maintenance calendar.

For the latest industry news visit

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.