Performance And Longevity From Simplicity Products

Performance And Longevity From Simplicity Products: Known for delivering mowing perfection, and this year is no different. Simplicity tractors are built to last with durable components, you can enjoy the experience further with comfort, superior traction and several attachments to make your life easier, and in 2019 Simplicity is adding new features to its Tractors.

The Regent Side Discharge Line UP is powered by Briggs & Stratton V-Twin engines, the NEW SLT260 is fitted with full width rollers, 15” contoured seat and Tuff-Torq® K46 transmission. Delivering the ultimate in all-round cutting performance.

Performance And Longevity From Simplicity Products

Simplicity rear discharge tractor is now available with front and rear suspension, introducing the SRD360, fitted with a 102cm/42” deck, Tuff-Torq K46 transmission and a 350 litre collector, a mulch kit is also included.

New to the Zero Turn range is the SZT275 rear discharge model, fitted with half baffles and eliminator blades for mulching, a full baffle kit is available. SZT250 and SZT350 models are fitted with rear rollers, and front and rear suspension.

Easy to use controls, great traction and durable cast made for a lifetime without worries. Choosing Simplicity is about making the right decision.

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Groundsman Industries Ready For SALTEX

Groundsman Industries Ready For SALTEX: Groundsman Industries have lined up three products from their range that are more than worthy of special attention at the Saltex exhibition. The Northern Ireland manufacturer has a worldwide reputation for durable, high performance equipment and the latest machines affirm this. The Groundsman Turf Multi-Cutters are renowned for their smooth, effortless cutting ability, ease of use and operating comfort. Features and benefits which become obvious within the first few feet of operation.

The two-wheel drive model, the TMC26, is simple to operate and portable, making it ideal for landscapers, contractors and hire outlets, with the cut quality to work in fine sports turf as well. There’s a range of interchangeable sod cutting blades available from 30cm (12”) to 60cm (24”) wide that are adjustable down to 7cm (3”) deep. These are complemented with blades for mole draining, de-compacting, trenching and cable and pipe insertion, down to 15cm (6”) depth. The precision cutting of the rear blade four-wheel drive model, the TMC46, makes it the choice of golf clubs and turf farms.

Groundsman Industries Ready For SALTEX

Groundsman offer a range of pedestrian and tractor mounting turf aerators ranging from 45cm (18”) to 180cm (6ft) working widths. Take the 345HD model and you have a compact, professional pedestrian machine that can access most garden gates and aerate all types of grass including gardens, parklands and fine lawns as well as sports greens. For larger areas the tractor mounting models are available for tractors from 18hp. Rugged, durable and low maintenance, this range has a proven record for reliability, performance and versatility. There is a crank driven elliptical plunge action mechanism that drives the tines into the most compacted surfaces, down to 15cm (6”) deep, with very little surface disruption. Quick change hollow core, solid and slitting tines are available together with tine heads for thatch removal or surface preparation for overseeding.

Also on display at Saltex, the Groundsman Flexblade Core Collector attaches to any aerator, pedestrian or tractor mounted with swath width from 60cm (24”) up to 210cm (83”) to enable you to core and collect in one pass. It’s also available for compact tractors and turf vehicles for follow-up collection of cores and linear aeration soil. The patented Flexblade core collector system was developed by Groundsman Industries and is the most efficient method of collecting cores, wet or dry, with minimum disruption. Attached to an aerator the Flexblade catches more than half the cores before they touch the ground. The remainder are scooped cleanly from the surface by the Flexblade that follows undulations like shovels, for the cleanest possible collection. The holes remain open for top dressing. Trampling and surface disruption are minimised and the greens are quicker back in play. Visit Groundsman Industries at Saltex on Stand No. K078

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Trubshaw Cross Praise New Tractor

Trubshaw Cross Praise New Tractor: Andy Salt, chairman at Trubshaw Cross Ladsandads, has said that a new Branson 6225 Trac-tor recently bought from Campey Turf Care Systems, has been more than just a new piece of machinery.

In 2016 the North Staffordshire club took over their own maintenance from Stoke-On-Trent Council and purchased several new machines including an Imants Shockwave 155, Sisis Twin Play and a TriMax Pro Cut S3.

Trubshaw Cross Praise New Tractor

Whilst there has been a significant increase in pitch quality, resulting in each pitch being able to host more games per season,  Andy and his team of volunteer groundsmen were starting to feel the ill-effects of working in the elements on their old tractor that didn’t have a cab, but after only two weeks with the Branson there has already been a lot of progress.

“Because we’re all volunteer groundsmen the time of day we do the work is in the early evening, and the time of year we’re using the ShockWave it’s in the dark and cold weather,” Andy said.

“We were at a point where we weren’t using the machine as much as we wanted to because we were sitting on a tractor that didn’t have a cab or heaters, so we were sitting in the weather.

“Some of the groundsmen were getting ill because they were sat out in the cold and the rain and were having to take time off of work, so we bit the bullet and bought the Branson through a grant from the Stoke-on-Trent Council Community Fund.

“We got the tractor just over two weeks ago and the impact that it’s made already is monumental. I was down here last night straight from work and cut the pitches in about four hours whereas on our old tractor it took eight hours.

“We put some liquid fertiliser down so we’re cutting five days a week just now and we wouldn’t have been able to do that with the other tractor.

“The mower we got from Campey six months after the original purchase is another fantastic bit of kit and that’s the Trimax Pro Cut S3. For us, it’s easy to use and cheap to maintain, which is important for us going forward within our budget.”

“All of the improvements we’ve been able to achieve already with the new Branson benefits everyone who plays. Within the North Staffs Junior Youth League, which is also a part of our organisation, there are just over 300 teams from all over North Staffordshire and South Moorlands, which is a good few thousand players,”

“The improvements we have made here has meant we’ve almost doubled in team numbers, and that was part of the grant application to get the new tractor, it’s about everything else we can do. That one tractor isn’t just about making the pitches better, it gets more teams playing and then you need more referees, so we’re training more of them and then the café gets busier so we’re employing more volunteers for that, so it’s the whole picture of it, it isn’t just a tractor.”

Having made their 11-pitch site at Burslem a success, Andy now works with four other branches within the Ladsandads organisation that carry out their own maintenance. By doing this the club hopes to make the transition easier than it was at Trubshaw Cross, with Andy and his team starting with a base level of knowledge which has quickly grown to planning their own renovations through the help and advice of Campey and the IOG.

“From the very first time we met Richard Campey we thought it would be better to have our own equipment. He spent a very wet and horrible bank holiday Monday with us going around the site and I visited him at their yard. He talked us through the machinery, but that very first meeting gave me the confidence to take on self-management,” Andy explains.

“It’s been a very steep and very fast learning curve. When we first started I knew grass was green and that was about it. Since then we’ve put our own IOG level 1 course on and there were 14 of us on that course, we pulled in some volunteers from other branches of Ladsandads that are also self-run and now there’s a bit more of a collective.

The help from Andy Jackson Head Groundsman at Stoke City FC who has been advising us on behalf of the IOG has also been invaluable, and without that collective help from everyone, we would have been stuck. Now we’re in a position where we can pass on all the lessons we’ve learnt so the other branches can improve even faster.”

For more information, visit: www.campeyturfcare.com

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Dennis Technology At SALTEX 2018

Dennis Technology At SALTEX 2018: Visitors to the Dennis stand (E070) at IOG SALTEX on October 31 and November 1 will have an opportunity to see how the company’s range of world class turf maintenance equipment enables turf professionals to benefit from cutting edge technology.

Taking centre stage on the Dennis Mowers stand will be the new PRO 34R rotary mower. Following the launch of the prototype model at last year’s show; the professional rotary mower has been refined and developed with feedback from groundsmen over the past 18 months.

Dennis Technology At SALTEX 2018

The PRO 34R is a 34” (860mm) rotary mower designed to help groundsmen achieve an aesthetically pleasing appearance and desired playing surface.

The mower is ideal for sports pitches and lawns producing the enviable ‘Dennis Stripes’ while a powerful vacuum flow collects debris quickly and efficiently.

The angle of the cutting deck and twin blades can be easily adjusted using a single ‘click adjuster’ ensuring the mower is suitable for changing conditions and meeting groundsmen’s requirements.

Unique features of the Dennis PRO 34R Rotary Mower include:

  • 5 forward and 1 reverse selection for speed of operation
  • 90 litre capacity grass box
  • Fully adjustable angle of deck for changing conditions
  • 2 section cast aluminium rear roller
  • Easy to use height of cut gauge
  • Single point height of cut adjustment for ease of operation
  • Optional front wheel or smooth/weile roller options
  • Front brush for standing grasses upright
  • Adjustable handlebars for operator comfort

Also on view will be the G860, G34D and the Premier professional cylinder mowers along with the the FT510, Razor Ultra, and S500 Plus seeder, which creates ideal seed germination pockets whilst reducing seed wastage.

The FT510 professional mower is unrivalled as a mower and turf maintenance machine on all areas of fine turf. A cutting width of 510mm (20”) and a range of 11 interchangeable cassettes mean that one machine can be used for several different jobs from scarifying, verticutting, brushing and cutting.

The Razor Ultra 560 has been developed to specifically meet the demands of cricket pitches as well as golf greens & tees and bowling greens. The machine has a 560mm (22”) cutting width and incorporates many key features including an 11 bladed cutting cylinder, ultra short wheelbase for undulating surfaces, tungsten tipped groomer, compact handle design for extra manoeuvrability, click height adjusters and stub free transport wheels for easy transport from site to site.

The G860 has eleven quick changeover cassette options giving ultimate flexibility and a single power unit for many day-to-day maintenance tasks. This versatility coupled with low ground pressure, at just 166kgs, and manoeuvrability makes the G860 the choice for many top sporting venues around the world including the recent FIFA World Cup Finals in Russia.

Designed and built following the same concept as the Dennis G860, the G34D is a dedicated cylinder mower that incorporates a large-diameter eight bladed cutting cylinder to cater for a wide range of uses to leave a precise cut.

Fitted with either a powerful Honda Petrol or Kubota diesel engine, the Premier is available in 30” and 36” cutting widths. A 3 section rear roller and steering brakes make it easy to manoeuvre giving an excellent stripe pattern and rolling characteristics. Complete with a large diameter front roller with adjustable scraper, for precise height of cut control, the machine is easy to adjust on both sides with the use of a single spanner.

In addition to the range of Dennis products on show, the combined display with SISIS will also show a range of natural and synthetic turf maintenance machinery.

For further information or a no obligation demonstration, please contact Dennis 01332 824 777 or visit www.dennisuk.com

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.