STIHL announce new bar and chain upgrades

/in , , /by

STIHL announce new bar and chain upgrades: STIHL continues to offer professional forestry and agriculture chainsaw users enhanced performance with the introduction of a newly designed guide bar and saw chains for 20% faster cutting performance, with lighter weight.

Standard fitment on the MS 261 C-M forestry and MS 271 agriculture chainsaws, the Light 04 chainsaw bar features a new innovative slim contour design that means it weighs up to 200g less than the previous Rollomatic E bar, ensuring forestry and agriculture workers can benefit from easier manoeuvrability, improved balance, and less fatigue when cutting. The new guide bars weigh 10% (40cm bars) to 20% (50cm bars) less than previous versions, while the slimmer profile and bar tip allows for faster plunge cutting.

STIHL announce new bar and chain upgrades

STIHL announce new bar and chain upgrades

As part of the new chainsaw upgrades, the MS 261 C-M will now come fitted with .325” RS PRO and the MS 271 with the RM3 PRO saw chain as standard. The 1.3mm gauge chain, which matches the 1.3mm bar groove, offers up to 20% greater cutting performance when compared to .325 RS saw chains, which are 1.6mm thickness. The faster cutting comes from the thickness of the cutter tooth that is reduced from 7.7mm to 6.8mm, meaning less wood is removed from the cut for more efficiency.

The MS 261 C-M and MS 271 are available from May 2020 with the new Light 04 and new RS saw chains.

For more information on STIHL’s range of petrol powered chainsaws, please visit www.stihl.co.uk.

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Ease, accuracy and time saving from Foley

/in , , /by

Ease, accuracy and time saving from Foley: Starnes Engineering has experienced the benefits of an automatic relief grind using the Foley Company 633 Accu-Pro.

The East Sussex company has been continually growing since it was started four years ago by ground care and agricultural engineer, Jamie Starnes, with grinding counting as a key service over that time.

Ease, accuracy and time saving from Foley

Ease, accuracy and time saving from Foley

Jamie has gathered a vast amount of grinding experience within the industry, including working as tournament support at the 2015 Open Championship at St Andrews, Wentworth and The Oval. During this time, he has used an array of grinders from various companies, but the Foley 633 Accu-Pro has proven the best he’s used for relief grinding.

“It’s just so user-friendly compared to anything else that I’ve used, and I’ve used quite a few different makes for myself and companies at different sites,” Jamie explained. “I think it’s just superb, really. It’s easy to use and set-up, and it’s accurate with it. And the fact its automated means you can leave it to it, so you’re gaining productivity time, and you’re not disappointed with the results.

“Relief grinding makes such a difference to the quality of cut and the general ware of the machine, units and grass itself. It’s a vital thing to do for anybody, but it is time-consuming with other machines compared to this one even with the units themselves. With different makes, you have to remove a lot of stuff from the unit like rear roller brushes for example, but on the Foley, you don’t have to strip down units and take things off, you can pretty much clamp and hold down any unit with anything still on it, which is another massive time-saving aspect.

“I was looking for something that was fully automated that would speed up the whole process, and something that could be set up quickly and easily that you can walk away from when possible to do other things and make use of the time. When I’ve used other grinders to relief grind, I’ve had to stand there and manually push and pull the machine through each individual blade whereas once the Foley is set up, you can leave it.

“Once you’ve set it up and you know the formula from having done a unit, and you’ve got another five, ten or however many left to do you can more or less put them in and run through them. We’ve had a lot of use out of the grinder since we got it in January – at least 40 units or more. It’s been used to grind Jacobsen, Toro and John Deere, so we’ve had a bit of everything. It is very simple to go between each brand. The machine is superb for simplicity and swapping between units. And not only for the positioning of the bench and stuff but other things like moving the motor drive from left to right. On other models, it’s actually quite a paraphernalia to move it all around, but with the electric motor you pick it up and move it from one side to the other, so it’s a vast improvement for ease and speed and everything like that.”

Several features on the 633 Accu-Pro combine to make it a reliable and straightforward grinder. The Accu-Touch 3 Control system provides a step by step tutorial for new technicians, while more experienced operators can use the system to tell the machine what they’re working on and it’ll do the rest. Automatic placement features, the Accu-Reel Selector and Cylinder Height Stop, automatically locate the reel for a fast and easy spin and relief grind in one set-up and work with the pre-set relief angles to provide the hands-free relief grinding Jamie has found so beneficial.

To experience the difference of the Accu-Pro 633 or other Foley Company models, contact ProSport UK Ltd at prosportukltd@gmail.com.

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Safety measures unveiled as JCB production resumes

/in , /by

Safety measures unveiled as JCB production resumes: JCB today announced a partial re-starting of production at five of its UK factories as a comprehensive package of safety measures is rolled out to protect employees in the wake of the Coronavirus crisis.

British production lines fell silent on March 18 and the vast majority of JCB’s 6,500 UK employees have been furloughed since April. Today JCB has confirmed that low levels of production are resuming – with a far-reaching package of safety measures introduced to fully protect employees. These include:
·        Employees to self-assess for COVID-19 symptoms before leaving home
·        Temperature checks overseen by medical staff for every employee arriving for work
·        Issuing of surgical masks to office and shop floor employees
·        Provision of visors for shop floor employees for extra protection
·        Introduction of thermal imaging cameras at UK plants later this month
·        Widespread provision of hand sanitiser
·        Clearly-marked walkways and a reduction in office desks to maximise social distancing
·        Closure of canteen facilities and vending machines and suspension of car sharing schemes
·        Disabling of lavatory hand dryers in favour of paper towels
·        Working from home for employees where at all possible

Safety measures unveiled as JCB production resumes

Safety measures unveiled as JCB production resumes

JCB CEO Graeme Macdonald said: “Production has resumed at a very low level, mainly to satisfy demand for agricultural machinery. Ahead of this re-start, an exhaustive review was undertaken to enable us to introduce wide-ranging measures that will best protect our employees.  The actions we have taken ensure that safe distancing between employees on-site can be achieved at all times. In circumstances where risks are greater, additional protective visors are being provided. The health and safety of our employees is absolutely paramount as we all adjust to this new normal and the measures we have put in place will ensure we all stay healthy and avoid risks.”

The Loadall division at the World HQ, Rocester, Staffordshire,  JCB Earthmovers and JCB Landpower in Cheadle, Staffordshire have resumed production along with  JCB Transmissions in Wrexham and JCB Cab Systems at Uttoxeter. The move means a return to work for more than 400 employees

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Overseeding transformed for Kelso GC

/in , , /by

Overseeding transformed for Kelso GC: A BLEC Multi-Seeder has improved both the speed and accuracy of overseeding at Scotland’s Kelso Golf Club.

With just Head Greenkeeper James Balmbro and an apprentice to maintain the 18-hole parkland course, the Multi-Seeder has improved the efficiency of their greens seeding programme, with a noticeable improvement in results.

Overseeding transformed for Kelso GC

Overseeding transformed for Kelso GC

Situated within the confines of Kelso racecourse in the Scottish Borders, overseeding is traditionally carried out twice a year across all of the club’s 18 greens. “Our manpower and available budget mean we focus on overseeding following both the spring and autumn renovation season” explains James, who has been at Kelso GC for five years. “Previously, we would simply broadcast seed by hand, or with a spreader, so it was important for us to find a way of making the process and end result more effective, to deliver the results we wanted to achieve.”

The BLEC Multi-Seeder features two, spiked ring rollers to saturate fine turf and amenity type areas with up to 1500 holes per square metre, ready to accept the seed. Re-engineered under the guidance of Redexim, it features a new seed ratio and seed feed system that offers the user incredibly accurate distribution for all seed types. “We’ve used some ultra-fine dwarf ryegrass in the latest operation, but have also had bent and fescue seed running through the Multi-Seeder without a problem. Within just 7-10 days, you can see the seed germinating from the dimple holes – the difference in the uptake we’ve achieved has been massive.”

“It’s a fantastic piece of kit that’s super easy to set up and adjust; so user-friendly in fact I’ve had our apprentice out there using it and he loves it! For us as a small greens team, operations all come down to time so the fact we can attach the unit straight to the tractor’s 3-point linkage and go, is great. We can get all of the greens done in one day with the Multi-Seeder and all without causing any disruption to the surface.”

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

AH75 the solution to excessive first cuts

/in , , /by

AH75 the solution to excessive first cuts: With the impending difficulty some green space professionals will soon be experiencing from a delayed first cut, many are turning to the Etesia Attila AH75 brushcutter as a solution. 

The Etesia Attila AH75 brushcutter offers ride-on performance in a pedestrian machine and has been designed to work in the toughest of conditions. This powerful workhorse effectively deals with clearing vegetation from a wide variety of sites – long grass, weeds, bracken and brambles on woodland paths or orchards. Ease of operation and manoeuvrability ensure total efficiency and high output.

AH75 the solution to excessive first cuts

AH75 the solution to excessive first cuts

At a time when many will be facing excessive first cuts, green space professionals – particularly those working for local authorities and landscape contractors, will find the Etesia Attila AH75 a cost-effective solution. At just £3,200 plus VAT, this reliable and powerful machine has been proven to outperform many of its counterparts at a fraction of the price.

The Attila AH75 is powered by the Honda GXV 390 engine and fitted with a T3 transmission combining differential lock and front wheel locking system with a simple height of cut adjustment from the new handle bar design which allows movement into offset for use on slopes.

Efficiency

  • Heavy-duty brush cutting (up to Ø30)
  • Mowing on the most difficult slopes (up to 20°) thanks to the hydraulic transmission with a differential lock
  • Two idlers that can be locked without a tool for improved stability on slopes
  • Possibility to fit two wider rear wheels as an option
  • Cutting height adjustment with three positions from the new handle bar design
  • Handle offset control from the operating position with three working positions and one transport position

Comfort

  • High manoeuvrability thanks to the hydraulic transmission – three forward speeds and one reverse speed
  • Differential lock can be engaged without interrupting movement
  • All operating controls are available from the operating position for convenience and safety
  • Central handle bar that allows easier access to low controls (parking brake, forward transmission bypass, engine starter), with full protection for cables
  • Parking brake for safe immobilisation
  • Anti-vibration rubber handles

Ruggedness

  • Machine can be moved into vertical position to gain access to the cutter blade for maintenance and cleaning
  • Maintenance-free hydrostatic transmission with forced-air cooling, integrated expansion vessel
  • Flail blades: reversible, protect the blade transmission system, low maintenance costs
  • Rugged and reliable engine: Engine crank shaft mounted on bearings.

A full two-year commercial warranty comes as standard.

You can view a video of the machine in action: https://youtu.be/LDpj7a013Ys

For further information, please contact Etesia UK on 01295 680120 or visit www.etesia.co.uk.

For more news, reviews and insightful views, you can follow Etesia UK on Twitter @EtesiaUK and like the company’s Facebook page – www.facebook.com/EtesiaUK. You can also view the latest Etesia videos by visiting www.youtube.com/EtesiaUK.

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.