Tag Archive for: introduces

Kubota introduces M6-001 Utility series

/in , /by

Kubota introduces M6-001 Utility series: Kubota (UK) Ltd has taken the covers off a cost-sensitive, five-model M6-001 Utility series tractor range. As the successor to the MGX models, the M6-001 Utility series spans 104-143hp, and meets EU Stage V emissions thanks to an improved exhaust after-treatment package that contributes to a lower cost of ownership.

Like the MGX, it offers plenty of horsepower for local authorities, grounds maintenance contractors and racecourse groundsmen looking to increase productivity with larger implements, while delivering simplicity of operation and exceptional reliability.

Kubota introduces M6-001 Utility series

Kubota introduces M6-001 Utility series

Short wheelbase models include the M6-101U and M6-111U, and both use a 3.8-litre Kubota V3800 four cylinder engine. Maximum power outputs are 104hp and 111hp, with maximum torque figures of 346Nm and 379Nm respectively. These two models weigh 4.3 tonnes, and use a 2.54m wheelbase.

Long wheelbase M6-121U, M6-131U and M6-141U use Kubota’s 6.1-litre V6108 four cylinder engine. Power outputs are 123hp, 133hp and 143hp, with maximum torque figures of 503Nm, 544Nm and 586Nm respectively. These three larger models weigh 4.8 tonnes, and use a 2.68m wheelbase.

Engine technology on all models has seen an improvement in exhaust after-treatment, with DOC and DPF performance increased to deliver greater operational flexibility and lower cost of ownership. DPF regeneration can now be achieved at a much lower engine speed – typically 1,200rpm down from 2,000rpm – and using a much lower working temperature of just 50 degrees C. The latter makes regeneration much easier to achieve with light engine loads, lower noise levels and a reduced fuel burn.

The DPF cleaning interval for M6-001 Utility tractors is 8,000 hours for the 6.1 litre engine, and up to 6000 hours for the 3.8 litre engine, again contributing to lower operating costs. Engine oil change intervals are every 500 hours on all models.

All M6-001 Utility models get a 40kph semi-powershift transmission, which uses eight powershifts in three mechanical ranges to provide a 24×24 gearbox. The option of a creeper range increases the choice of ratios to 32×32. Transmission functionality includes auto-shifting in each range, and a sensitivity dial – the latter allows operators to adjust the responsiveness of gear changes to suit load on the tractor.

Operator comfort is provided by an air suspension seat in the same cab frame shared wth M6-002 and M7003 models, while front axle suspension is available as an option. A wide sunroof offers generous visibility for those looking to equip the M6-001 Utility with a loader, of which there are two variants – 3.7m or 4m lift height to the pin, and maximum lift capacities of 1,950kg or 2,200kg respectively.

A fixed displacement open centre hydraulic system provides 71 and 77 litres/min of oil flow respectively for short- and long-wheelbase models, while two mechanically operated spool valves are fitted as standard. Two additional spools are optional.

The Cat III rear linkage includes electronic linkage control with a five-tonne lift capacity on short wheelbase models and 6.1 tonnes on long wheelbase tractors. PTO equipment comprises a two-speed 540/1000 as standard, with a 540 Eco available as an option. All models can be equipped with an optional front linkage with 2.6 tonnes lift capacity, an optional 1,000rpm front pto, and the capability to run pto-powered equipment while stationary.

M6-001 Utility models also benefit from Kubota’s portal front axle with bevel gear drive, offering generous ground clearance and a 55-degree steering angle.

Kubota’s M6-001 Utility series is priced from £53,300 for the 104hp M6-101U, with the M6-141U costing £75,200. A range of Kubota Care warranty packages are available, offering up to five years and 5,000 hours of cover.

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Foamstream introduces hybrid at SALTEX

/in , /by

Foamstream introduces hybrid at SALTEX: Weedingtech is proud to present the Foamstream M600H, their first hybrid unit for herbicide-free weed, moss, and algae control.

Featuring a battery-powered generator, the hybrid combines the efficiency of electric power with industry-leading hyper-efficient boilers. Foamstream is an ecologically safe, simple, patented process that works by killing unwanted vegetation using heat delivered by near-boiling water, insulated by a biodegradable foam made from natural plant oils and sugars.

Foamstream introduces hybrid at SALTEX

Foamstream introduces hybrid at SALTEX

The M600H takes the concept into an extra dimension with the introduction of a battery unit to further reduce noise emissions, making it their quietest machine to date. It delivers a flow rate of 7 litres per minute, which means it is particularly well suited to smaller-scale jobs and harder to reach areas in inner-city and rural environments. Organisations looking to introduce more environmentally friendly alternatives to the use of glyphosate in their weed control operations can combine the benefits of Foamstream application in busy areas with reduced noise at only 55db. This makes it ideal for municipalities, green space contractors, utility companies, educational establishments among others. The M600H is suitable for mounting on a wide range of municipal vehicles, including a large variety of UTVs.

Also on show at Saltex is the Foamstream L12 machine. Operator driven, relying on the operator to run it, it has a rapid start-up time of 30-60 seconds with unlimited trigger time and is very easy to use. Its diesel and petrol dual-fuel source powers its 12 litres per minute flow rate, matching that of the Foamstream M1200 system. The robust design is frame-mounted with four fork-lift points and can be used on a variety of different vehicles. The L12 includes additional functionality for street cleaning and a new rinse-mode feature provides the operator with an option to use the machine with just water and no foam at high or low pressure.

Foamstream is highly efficient which means fewer treatment cycles are required throughout the year, proving it to be more cost-effective, needing less labour. No ongoing operator certification, training or specialist PPE is required. What’s more, the process is safe around people, animals, water, and delicate environments. Foamstream is also multi-functional and while it is used to control vegetation, it can also be used across departments as a cleaning solution for gum removal, power washing, and sanitisation. Foamstream will be found on Stand E072 at Saltex +44 (0) 203 909 0050.

info@weedingtech.com

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Polaris Introduces Heavy Duty Parts

/in , /by

Polaris Introduces Heavy Duty Parts: Everybody and every ride is different, and for those who ride in extreme conditions; conditions that are even tougher and more demanding on the vehicle, Polaris introduces its Heavy Duty Parts Program: a collection of parts that have been engineered to deliver the best driving experience possible, no matter how extreme it may be.

The Heavy Duty (HD) parts expand the boundaries of Polaris riders by helping to tackle heavy payloads, extreme cold, extreme heat and much more. The HD Parts program offers HD Brake Pads, HD Drive Belts, HD Oil Filters and HD Bearings that feature triple sealing to keep out water dust and mud making them last much longer in the extreme, as well as HD Bushings that are made of a stronger material compound to enhance the wear characteristics.

Polaris Introduces Heavy Duty Parts

Polaris Introduces Heavy Duty Parts

Dario Baraggia, PG&A Manager at Polaris Off-Road Vehicles EMEA said “Our Heavy Duty Parts have been developed and tested to ensure riders get the most out of their rides, taking the passion of the riders, workers and outdoor enthusiasts to the next level.”

HEAVY-DUTY BRAKE PADS

Polaris Parts introduces four new, tough handling, brake pad options. Available in sets of two pads and designed to provide a premium braking performance, riders can trust the brake pads will tackle severe mud riding, operate under extreme payload and aggressive towing. The Heavy Duty options also have an increased pad density that lasts three times longer in harsh muddy and wet conditions and a high friction capacity resulting in less effort and shorter stopping distances. The HD Brake Pads offer quiet breaking through a noise insulator which also helps to prevent squealing in all extreme conditions.

HEAVY-DUTY DRIVE BELTS

Purposely built for Heavy-Duty customers, the new Heavy-Duty Drive Belts will fit over two million Polaris Off-Road Vehicles including the Sportsman 500s, RGR 1000s, RZR XP 1000s and more. Developed in collaboration with Powertrain and clutch engineers to ensure 100% customer confidence in maximising the performance and ultimate durability of the ride. The HD Drive Belt is made from an enhanced rubber material compound that will keep the belt cool in extreme conditions and a patent cord treatment process that maximises the transfer of horsepower to the ground to help hauling heavy loads; extreme riders are now unstoppable.

HEAVY-DUTY OIL FILTER

Engineered to keep oil clean with a robust housing and steel tube centre, the Heavy-Duty Oil Filter has been designed to resist vibration and high temperatures under extreme riding conditions. With advanced synthetic material the HD Oil Filter is built to give the highest debris holding capacity, maintain oil flow and maximise performance. The Heavy-Duty oil filters will not deform under duress from the harsh and extreme conditions. The three new Heavy-Duty Oil Filters will fit over two million Polaris Off-Road Vehicles.
For prices and availability in your area, please contact your local Polaris dealer.

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Makita introduces new 12VMAX

/in , /by

Makita introduces new 12VMAX: Among a series of new product launches, Makita has added two 12Vmax CXT multi-line lasers to its extensive range of site equipment. The multi-line lasers project one horizontal and two vertical 360° lines and include a precise self-levelling feature to enable simple setup, layout and alignment.

The 12Vmax CXT Red Multi-Line Laser (SK700DZ) and 12Vmax CXT Green Multi-Line Laser (SK700GDZ) are versatile and durable with a range of features to make work on site as simple as possible. The Red Multi-Line Laser has a range of 25 metres in each direction (50 m diameter) while the green lasers of the SK700GDZ provide an increased range of 35m (70m diameter) and better line visibility in brighter conditions. The robust units are IP54 (dust and splash water) rated, have an operating temperature range of -10 to 50 ºC and feature a ¼ inch tripod thread for easy mounting.

Makita introduces new 12VMAX

Makita introduces new 12VMAX

Each vertical and horizontal laser emitter on the tool projects four lines to create up to three 360-degree laser lines. Depending on what is required, users can choose various combinations of the laser lines in addition to the full three line configuration. Single horizontal or vertical lines, vertical and horizontal combined or both vertical lines (front to back and side to side) are available. It also includes three brightness settings for optimum visibility depending on the environment.

The multi-line laser units feature a rotary base with eccentric rotation mechanism, which reduces set up time, by enabling the laser body to rotate without changing the position of the defined plumb point. With a dial for fine adjustment, the vertical laser lines can also rotate around the defined plumb point by up to 10° left and right.

In addition, the pendulum operated self-levelling system, which is accurate to ± 4º, makes it simple to ensure the lasers are level, even on uneven ground. The units also feature a pendulum lock where self-levelling is not required and to protect the laser when in transit.

Part of the Makita CXT platform, the compact 12Vmax batteries used in the multi-line lasers provide excellent runtimes, with up to 22 and 14 hours from a 4.0ah battery for the new red and green multi-line lasers respectively.

The operational range of both multi-line lasers can be increased to 70 metres (140m diameter) with the use of the Makita LDX1 Line Laser Receiver Set (sold separately), which also enables effective, accurate use of the laser line in bright natural light.

Kevin Brannigan, Marketing Manager at Makita UK said: “The new 12Vmax CXT Multi-Line Lasers have been designed for use on a range of site layout, first- and second-fix tasks. The multi-line configuration and self-levelling mechanism makes it simple to align and layout everything from doors and windows, floors, pipework and electrical installations to tiling, lighting and kitchen and bathroom installations.”

To find out more about the Makita range of laser levels visit:  https://makitauk.com/products/measuring

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters

Kubota introduces the F-251 front mower

/in , /by

Kubota introduces the F-251 front mower: Kubota continues to expand its ground care machinery offering, with the addition of the F-251 to the company’s front mower range. This professional mower benefits from the latest engine technology to offer enhanced performance alongside features designed for productivity and high-quality cutting.

The new model uses a powerful three-cylinder 1123cc Kubota diesel engine which complies with the most recent EU Stage V emissions directive, while delivering 25hp for increased productivity.

Kubota introduces the F-251 front mower

Kubota introduces the F-251 front mower

A highly efficient two-range HST transmission offers on demand four-wheel drive (4WD) with the capability of selecting permanent 4WD.

This new F-251 model will also see the introduction of newly designed 1.52m (60in) side and rear discharge mowing decks with improved cutting quality. Both new decks have optional mulch kits available which offer a high-quality finish. All the controls are perfectly positioned, and the instrument panel is clear and easy to read in all light conditions, making work easier and quicker. Operators can set the adjustable steering wheel to the position that suits them best for comfort and convenience, and the F-251 is equipped with LED headlights for optimum visibility and as a key safety feature. To add extra reliability, the decks are equipped with puncture-proof tyres and for ease of maintenance, the engine cowling can be fully opened, and blades are quick to replace. It has also been designed for easy transportation, with tie down points at the front and rear for reliable and secure anchoring when transported on a trailer.

Once again, Kubota has demonstrated its commitment to making ground care tasks easier and quicker by means of innovation and market research, and will continue to do so and support its customers around the world, offering the best solutions for their needs, whatever they may be.

About Kubota

Kubota has been a leading manufacturer of agricultural, turf and construction equipment and Industrial Engines since 1890. With world Headquarters in Osaka Japan, and offices in more than 120 countries, and with over 41,000 employees throughout North America, Europe and

Asia, Kubota achieved revenues in 2020 of $17.3 billion. Although agricultural equipment is Kubota’s primary line of products, Kubota also produces a diverse portfolio of other products including city wide water filtration systems, irrigation, piping, roofing, housing and large underground valves.

Our Mission

Our mission, “For Earth, For Life,” speaks of our commitment to the preservation of the Earth’s natural environment while aiding the production of food and water supplies that are vital to societal needs as our world population continues to grow. That mission is realized each time a Kubota tractor harvests the land to produce life-sustaining food or our construction equipment

excavates to transport water resources or provide shelter. For more information on Kubota, please visit www.kubota-global.net or www.kubota-eu.com.

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.