Tag Archive for: Technology

Technology leads Surbiton’s new Toro fleet

/in , /by

Technology leads Surbiton’s new Toro fleet: In its latest Toro fleet deal with Reesink Turfcare, Surbiton Golf Club has invested for the first time in environmentally friendly technology with two Greensmaster 3360 hybrid mowers and accessed the industry’s newest spraying technology with the GeoLink system.

Course Manager Andrew Kerr says the reasons for these choices are progressive as well as practical: “We’ve been evolving and adapting to golf technology and the needs of golfers since we began, and this is the next step. We’ve noticed in recent years that members use Surbiton as a destination location, to enjoy the environment it provides, not just for playing golf.

Technology leads Surbiton's new Toro fleet

Technology leads Surbiton’s new Toro fleet

“With reduced emissions and lower operating noise these mowers contribute to creating a better and more relaxed place to be. And for the same reasons, are pleasing to the residents around us.” The benefits don’t stop there though, Andrew is also noticing a significant reduction in fuel consumption too.

Based on the outskirts of Southwest London, Surbiton Golf Club is one of the first clubs to take advantage of the latest GeoLink spray system, further helping with club efficiencies.

“The level of accuracy it provides you just wouldn’t be able to achieve manually no matter how good or experienced the operator,” he says. “It’s reducing how much product we use and lowering our costs because we’re only using what we need to, there’s no wastage. We don’t have square greens or fairways here and that had made spraying tricky but now we cover every inch with no over or under spraying.”

Andrew has noticed a big difference in the presentation and quality of the grass since using the GeoLink: “We don’t overdose and the grass is as plump as possible, which members love. They perceive the general standard of the course to be improved as a result.”

Also included in the order are two Groundsmaster 3500-D with Sidewinders, seven Greensmaster 1021 pedestrian mowers, two Reelmaster 3575-D fairway mowers and a Groundsmaster 4700-D rough mower in what is the club’s second Toro fleet deal.

“We got our last fleet about six years ago and we would usually replace it after five years, but we’ve been waiting for the machines to be available,” explains Andrew. “What we’ve noticed in the interim is that with the quality and longevity of Toro and the support of Reesink this hasn’t been a problem. We’ve had a Reesink technician come onsite for a day every two weeks and that’s kept maintenance and machinery performance up to standard.”

Andrew and his team of nine have found all the machines involved in the order deliver to their specific presentation requirements: “Our members love striped greens and complexes and having the combination of the cylinders and Sidewinders makes delivering eye catching stripes easy.”

To see how Toro fine turf machinery can benefit your course, call Reesink Turfcare on 01480 226800 or visit reesinkturfcare.co.uk.

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Dennis Mowers to Showcase Cutting-Edge Technology at SALTEX

/in , , /by

Dennis Mowers to Showcase Cutting-Edge Technology at SALTEX: Dennis Mowers, part of the Howardson Group, is gearing up for an exciting showcase at SALTEX 2024. Set to take place on 30 and 31 October at the NEC in Birmingham, Dennis Mowers will be displaying their innovative range of electric mowers and turf maintenance equipment at Stand E070.

Visitors to the Dennis Mowers stand can expect to see the latest advancements in turf maintenance technology. Here’s a sneak peek of the key products that will be on display:

ES-510

The ES-510 is an outstanding electric mower designed specifically for fine turf surfaces, making it an ideal choice for maintaining pristine sports such as bowling greens, croquet lawns, cricket squares and ornamental lawns. This model boasts a 510mm cutting width and is powered by advanced lithium-ion battery technology, providing a quieter and more environmentally friendly operation without compromising on performance. The ES-510 also features a versatile interchangeable cassette system, allowing operators to switch easily between different maintenance tasks, such as cutting, verticutting, and brushing.

Dennis Mowers to Showcase Cutting-Edge Technology at SALTEX

Dennis Mowers to Showcase Cutting-Edge Technology at SALTEX

ES-34R

The ES-34R is a 34″ (860mm) battery powered twin blade rotary mower using the lithium-ion battery technology. It is ideal for fine turf mowing and cleaning up operations and is used in many stadia and training facilities. Utilising the contra rotating hardened steel blades and low chute ensures maximum collection performance.

ES-860

The ES-860 is a powerful, high-capacity battery powered cylinder mower designed for larger sports fields and amenity areas. It delivers maximum versatility and has a range of 13 interchangeable cassette options to provide a solution for many day-to-day maintenance tasks such as cutting, scarifying, brushing and verticutting.

ES-22 Ultra

The ES-22 Ultra is a premium electric mower that combines cutting-edge technology with superior build quality, tailored specifically for bowling greens and other fine turf surfaces. Featuring a 22-inch cutting width, the ES-22 Ultra provides a consistent and even cut, which is crucial for maintaining a smooth, level playing surface. One of the standout features of the ES-22 Ultra is its tungsten-tipped groomer, which offers precise grooming to improve the overall health and appearance of the turf.

FT510

With a 51cm working width, the FT510 provides its user with comfort, flexibility and excellent performance. A true sense of control is obtained through the unique roller clutch drive for a smooth take-up and a variable clip rate helping to create the desired finish.

In addition to showcasing these state-of-the-art products, the team from Dennis Mowers will be on hand at Stand E070 to provide expert advice.

For further information or a no obligation demonstration, please contact Dennis 01332 824 777 or visit www.dennisuk.com

For more news, reviews and insightful views, you can follow Dennis on Twitter and Instagram @DennisMowers and like the company’s Facebook page – www.facebook.com/DennisMowersUK. You can also view the latest Dennis videos by visiting www.youtube.com/DennisMowers

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Hybrid technology taken to the next level

/in , /by

Hybrid technology taken to the next level: New for this year, the industry’s first and only fairway mower with a true hybrid drive system, the Toro Reelmaster 5010-H, has been given a comprehensive upgrade.

Toro is always listening to its customers, and it turns out there are quite a few improvements made to this revolutionary mower based on R&D and customer feedback, all with the intention to enhance performance and provide better machine control.

Hybrid technology taken to the next level

Hybrid technology taken to the next level

Jon Cole, divisional business manager for Toro’s UK distributor Reesink Turfcare, explains:

“The technology of the 5010-H is proven beyond doubt since its launch in 2015 with the hybrid elements of the engine design particularly impressing customers. Therefore, what I think many will be pleased to learn is that most of these advances relate to the hybrid technology.”

In brief, more electronic components have been added. Leading with the fact that the hydrostatic drive is now electronically controlled, and with this simple change, Toro has added its SmartPower system to automatically control mowing speed and optimise cutting performance.

In essence, what this technology does is monitor the engine’s RPM. Previously, the operator was responsible for controlling the machine’s speed when mowing long or wet grass or climbing a steep hill, now, the machine does it automatically. As the RPM drops, traction speed decreases until it recovers back to the desired speed and by maintaining optimal cylinder and blade speed a better and more consistent cut is produced.

The same technology also means that as speed decreases the traction pedal still moves an entire stroke giving increased resolution for tight turning in tight quarters. So, for customers mowing training grounds or a relatively flat golf course, they can slow down the engine speed to peak torque curve rather than peak of the horsepower curve.

It means the same results can be achieved with the engine 2600rpm on flat ground compared to 3000rpm, saving on fuel consumption, and lowering the noise level output.

With SmartPower also comes cruise control and this allows for a more consistent clip rate. Rather than relying on the operator’s foot to maintain a consistent speed the machine does that, as well as allowing maximum speed settings to be set. Whether the setting is at four or six miles an hour doesn’t affect quality, clip rate is not affected, and the same results will be achieved, it just helps with operator training and preferences.

There is so much more that’s been tweaked with this machine but the real benefits for customers as Jon sees it are: “These changes mean customers can focus on cutting, on achieving that fine mowing detail, following the clean-up edge of the fairway for example, rather than focusing on the speed at which they’re mowing. This is where everyone including members will see the difference, there’s more precision for better presentation.”

To discuss the greener option for the golf course, contact Reesink Turfcare on 01480 226800 or visit reesinkturfcare.co.uk.

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Origin Amenity Solutions Turf, Science & Technology Centre expands team

/in , /by

Origin Amenity Solutions Turf, Science & Technology Centre expands team: Origin Amenity Solutions (OAS) has announced that its research and development team has been strengthened by the appointment of Jack Taylor who joins as Turf Trials Technician.

Jack will be based at the Turf Science and Technology Centre at Great Dunmow in Essex. He will be assisting the research and development team – maintaining the trials site, carrying out scientific trials, collecting data, and helping to offer customers well-researched products combined with best-practice advice for their sites.

Origin Amenity Solutions Turf, Science & Technology Centre expands team

Origin Amenity Solutions Turf, Science & Technology Centre expands team

Jack has a background in the horticultural industry, including plant maintenance, propagation, and nursery management.  He will manage the OAS greenhouse, looking after a range of small-scale pot trials and analysing the data that is generated.

Jack has a passion for playing cricket as a wicketkeeper and coaches at a local level.

He comments, “I am excited to be working at Origin Amenity Solutions and I am looking forward to bringing my knowledge and experience to the team and developing my skills within the amenity research industry.”

The OAS Turf Science and Technology Centre operates at the leading edge of plant science and turf technology with a broad spectrum of products alongside integrated pest management and microbiology programmes.

At the state-of-the-art facility, Jack is joining a team of experienced agronomists, scientists, and turf specialists who combine cutting-edge research, expert knowledge, and advanced technology to develop and deliver the most effective turf management techniques.

From soil analysis and nutrient management to pest and disease control, OAS provide seasonal managed programmes designed to optimise turf health and maximise its aesthetic appeal.

OAS Research & Development Director, Geoff Fenn adds, “Our commitment to research and development sets us apart from the competition. We continuously invest in the latest equipment and techniques to stay at the forefront of turf science. I am delighted to welcome Jack to the team. In addition to his involvement with our research and consultation services, we offer training workshops to empower turf professionals with the knowledge and skills necessary to maintain and improve turf quality; Jack will be a core part of our delivery team.”

If you are interested in a career at Origin Amenity Solutions, please email recruitment@originukoperations.co.uk

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Origin Turf Science & Technology centre expands team

/in , /by

Origin Turf Science & Technology centre expands team: Origin Amenity Solutions (OAS) has announced the expansion of the Origin Turf Science and Technology Centre team and the promotion of one of its key people.

Angus Finlayson, who joined the Research & Development team in 2021 has been promoted to the Trials & Digital Platform Manager, splitting his time across 3 functions. Angus will be running research trials, collaborating on TurfKeeper’s digital advancements, and providing the software and hardware installation of CirrusPro™ within the OAS Irrigation team.

Origin Turf Science & Technology centre expands team

Origin Turf Science & Technology centre expands team

TurfKeeper is a web-based portal that gives turf industry professionals a fully integrated operations and management solution. The system is proving very popular with Turf and Business Managers alike as it provides complete control over staff management, task planning, machinery management, inventory control, chemical applications and budgeting.

Angus comments, “I am very excited to take on the position of Trials and Digital Platform Manager. This position provides me with the opportunity to merge my passion for research and technology, enabling me to contribute to the advancement of innovation and provide support in the ongoing technological initiatives within the group.”

With the CirrusPro™ irrigation control system, a course’s irrigation is literally in the hands of the Greenkeeper.  Users can securely adjust their irrigation settings from their Smart device, enabling them to make real-time updates from the office, on the course or at home — wherever they are, on any device.

Peter Robin, OAS’ Irrigation Product Manager adds, “CirrusPro goes beyond the limitations of other irrigation management systems, and I am delighted that Angus will be spending some of his time strengthening our team by installing CirrusPro™ for our customers.”

The company now has a vacancy for a full time Turf Trials Technician to be a part of the innovative research programme at OAS, getting involved in scientific trial work covering all aspects of the amenity industry. The successful applicant will assist with the maintenance, management, observation and recording of the site and the trials.

OAS is a leading force in the UK amenity industry, supplying products and solutions to turf management, amenity, and landscaping professionals. Their inhouse R&D Technology Centre supports their teams and provides advice on product selection, programming, application, and effectiveness and back this up, with soil analysis, weed, pest and disease identification, and water management.

Research & Development Director at OAS Geoff Fenn comments, “I am delighted for Angus. He has a natural aptitude for trials work and is enthusiastic to utilise his unique skillset to benefit the rest of the business. The appointment of a Turf Trials Technician to assist our team will enable him to develop and progress this for the benefit of OAS.”

For full details of this position or to apply please email a covering letter and your CV to recruitment@originukoperations.co.uk

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.