Perfect Start For Terra Spike GXi 6

/in , , /by

Perfect Start For Terra Spike GXi 6: Throughout his 26 years of service at Ashley Wood GC in Blandford Forum, head greenkeeper, Mark Sherwood, can count the snow days there on the fingers of both hands.  With high elevation and fast draining chalk soil, extreme weather rarely halts play at the Dorset club. Indeed during winter, Ashley Wood is a magnet for those looking for year round golf.

So in March, when Andy Frost from local Wiedenmann UK dealer,  EG Coles of Shaftesbury and Chas Ayres, Wiedenmann UK Sales Manager, pitched up to install a Terra Spike GXi 6 aerator, everyone was hugely surprised by a 3 inch snowfall.

Perfect Start For Terra Spike GXi 6

“The snow was gone in no time but it put a stop to the handover run,” recalls Mark Sherwood.  “However, that was the Monday, by the Wednesday we got on so well we were even hollow coring. It was an instant success.”

Ashley Wood’s GXi 6 was specifically chosen to deliver a clean finish to the greens, tees and aprons. Being busy with member and society golf leaves little down time and aeration can’t be allowed to cause disruption.

“We pushed it to see what it could achieve so we double hollow cored some greens,” continued Mark Sherwood.  “First pass, we used a two by one hole pattern.  We then cleared all cores. Next for the second pass, we slowed right down for maximum accuracy. Once we’d sanded the greens our golfers were straight back on without any issues.  Afterwards we got an endorsement I wasn’t expecting.  For the first time ever, several members came up to say they couldn’t believe the great finish the new machine had left, even with twice the number of holes we’d usually create!  Crucially, approval from our members, so we were as pleased as they were…”

Perfect Start For Terra Spike GXi 6

Mark and his team of four have kept to their planned programme and been out every three to four weeks, varying heave and depth as appropriate.

“Mostly we’ve been out with solids although at the end of August we went back for few single passes with hollow coring tines. We’ve lots of undulation, with several of the greens particularly full of humps and bumps.  The Wiedenmann follows these with no issues at all. The solid three part rear roller is a real benefit. There’s a good weight on it that puts the turf back ‘down’.  Previously we had to keep a very close eye with our last machine where we’d have had a few ripples in the ground where the tines enter and leave the ground but now it’s as smooth as silk.  Once it’s set it’s set.”

For more information, visit: www.wiedenmann.com

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Reesink & Toro At Ham Manor GC

/in , , /by

Reesink & Toro At Ham Manor GC: A five year commitment is a big thing, and is not something that should be taken lightly. Trust and confidence are key components, and Ham Manor Golf Club is convinced it has the best combination in Reesink Turfcare and Toro.

Paul Brown, who has been course manager at the West Sussex club for two years, says it was the right time to commit, but the big decision was to whom? “You place a lot of trust in your package partner and ask a lot from them so it’s important to feel comfortable they can deliver. I’ve previously used Toro equipment and I had no doubt that Toro would deliver for us here at Ham Manor, but the primary drivers behind this decision were the trust and confidence we have in Reesink’s area retail sales manager Jon Cole and Toro’s unequivocal reliability.

Reesink & Toro At Ham Manor GC

“You put your reputation on the line when you embark on this sort of package deal. It’s a massive financial commitment over a long period of time, and you’ve got to be sure you’re not going to be let down. I hadn’t felt the time was right to make that sort of commitment, until now.”

In the order are a Reelmaster 3575-D, TriFlex 3400, two Workman MDX-D and one Workman HDX utility vehicles, the Multi Pro Workman sprayer and ProPass 200 topdresser. These machines add to the Reelmaster 3100-D and two Groundmaster 360 Quad Steers acquired over the last 18 months.

Positioned where it is nestled between the coast and the South Downs, Ham Manor is a parkland course a mile away from the sea, which Paul says: “has its own microclimate. Out of ten we’re an 11 when it comes to how much grass growth there is here. We could easily cut the fairways five days a week and still have work to do!”

Add to that the general trend of wetter winter months and it’s clear to see why Paul has opted for the combination of Toro’s Reelmaster 3575-D and TriFlex 3400: “We can struggle to get equipment on the course, but the RM3575-D is light with a larger footprint, and its three-wheel design and turf-friendly tyres mean we can rely on it to not damage the ground. Both machines make light work of the amount of grass.”

“When I started here there was a ‘mix and match’ range of kit, and this batch of machines are like-for-like replacements of those while we begin the process of investing in one manufacturer for the majority of our equipment. When our existing lease arrangements have run their course, the intention is to renew the entire fleet in one package. I feel this is the most cost-effective way to bring reliable machinery management to the club.”

Complementing the machinery lease deal, Ham Manor has completed phase one of its irrigation installation. This is a three-phase process to renew the entire system. Back to back Toro Infinity sprinklers have already been installed on the club’s new academy area and brand new 18th hole and up next is a Toro Lynx central control system and then Infinity sprinklers, back-to-back on the greens, tees, aprons and partial fairways of the 18-hole course.

Paul says: “Replacing our irrigation system is the biggest single investment the club will make in the next 30-40 years. Due diligence was essential in the evaluation process and we were thorough in our research. We viewed all the major brands and even travelled overseas visiting factories to see how sprinklers are made, but when it came down to it, Toro had everything we needed, including first class support from Reesink’s Rob Jackson which of course, is an essential component of the whole process.”

It’s common sense that when making an irrigation decision to consider sustainability too. With that in mind a new irrigation lake has been built and a borehole installed and Paul is actively investigating running grey (roof) water into the lake to further enhance the club’s ability to be less dependent on a mains water supply. That, however, is a story for another day and we look forward to bringing you the latest at Ham Manor when phase two of the irrigation installation commences!

For more information, visit: reesinkturfcare.co.uk

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

New Grinders At Sandy Lodge GC

/in , , /by

New Grinders At Sandy Lodge GC: Sandy Lodge Golf Club in Hertfordshire has reaped the benefits both on and off the course of the Foley United Accu-Master 653 and Accu-Pro 673 grinders.

The club is one of England’s finest golfing establishments and has regularly hosted the Regional Open Qualifying Rounds from 2015 and will do so until 2019, as well as being a recent venue for the English Women’s Senior Open.

New Grinders At Sandy Lodge GC

Head greenkeeper, Richard Elderfield, along with mechanic, Peter Cook, knew their previous grinders were coming to the end of their useable life and both had a strong desire to bring relief grinding to the club because of the overall benefits it has for the plant and the machines. But, Peter quickly realised the Foley models had other features that would streamline his operation and make for a better work environment.

“Although relief grinding was our first priority it wasn’t the only aspect that attracted us to the Accu-Master 653,” Peter explained. “We also like the enclosed cabinet on the cylinder grinder with the noise and dust protection it offered and we found the set-up of both grinders to be quick and easy, especially with the 653’s built in training programmes.

“Grinding is very important to us when it comes to the health of the course and the machinery. The quality and cleanness of cut will determine the smoothness and speed of the playing surface and it helps prevent turf infections and diseases.

“Relief grinding has made a lot of difference and the mower manufacturers also recommend it. We tend to put a lot more top dressing on our greens now and the relief grind allows the excess sand to be cleared away, so it’s not wearing the cylinder down and going off cut as quickly. It also means we have less potential contact between cylinder and bedknife therefore less heat build-up as there’s reduced contact area with the bedknife, so it makes the mower a lot more efficient overall.”

Talking about efficiency Peter adds, “We also see this in the grinders, as both machines are fully automated, with auto-start, traverse, infeed and shut down built in to the grinding programmes alleviating any need for any human input between phases.  We can have both grinders running at the same time allowing us to carry out other tasks therefore saving more time.

“I can now grind far quicker than before. If I’m doing a 5 head fairway machine once you set the 653 for the first unit it will then be set for the remainder.

“It’s easy to access the machine and I have a winch to lift the reels in and out which makes the entire process easier. There is also an option of a lift-table if you prefer.

The automation is a huge benefit and as we are limited for space in my workshop and with the 653 being fully enclosed means there is very little noise coming from the grinder, allowing me to comfortably work close by.

“I thought I would struggle with the relief grinding as I had never done it before, but the training was excellent, and I picked it up very quickly”

Both Peter and Richard have been impressed by the quick and reliable service they have received from Ian Robson of ProSport UK, the Foley United importer both throughout the purchasing phase and the aftercare.

ProSport UK focus strongly on aftercare with an emphasis on supporting their customers and training them how to operate grinders they may not be familiar with. All geared to getting the best out of their new machine as quickly as possible.

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Standards Maintained at Ladybank

/in , , /by

Standards Maintained at Ladybank: Designed originally by Old Tom Morris, Ladybank Golf Club is a rare thing in Fife, enjoying as it does a reputation as one of the finest inland layouts based in Scotland and providing a classic heathland challenge to golf lovers away from the sea.

Recently ranked #2 in Great Britain’s Top 100 Courses under £100 by National Club Golfer magazine, Ladybank is established on the Fife Open Championship Qualifying Trail, and has hosted final qualifying on seven occasions since 1978 for the Open Championship played at St Andrews. It was also a qualifying venue in July for this year’s Senior Open Championship on the Old Course.

Standards Maintained at Ladybank

Managing secretary Gordon Simpson joined the club over two years ago and carried out a comprehensive assessment of the whole club and course set-up. He knew the course and its quality from playing regularly in qualifying tournaments as a PGA professional, and immediately recognised that the combination of an ageing machinery fleet and increasing repair bills meant a replacement policy needed to be implemented.

Gordon therefore asked the six-strong greenkeeping team led by course manager Colin Powrie and head greenkeeper David Gray to put together a wish list of new machinery from scratch, that would help them to maintain the golf course to the required high standard. As a result, the club has made its first ever John Deere fleet purchase, with equipment supplied by John Deere dealer Double A of Cupar in Fife.

The new machines include a 7500A fairway mower with TechControl display and smaller QA5 cutting units, a 4049R compact tractor, a Pro Gator utility vehicle equipped with an HD200 low-profile amenity turf sprayer and two 220SL walk-behind greens mowers.

“We conducted the usual tender process and gave the different manufacturers a list of the priority kit we required to replace the older machines,” says Gordon. “Double A and the dealership’s golf specialist John Bateson were superb throughout the process, both in supplying demonstration machines throughout 2017 and in their overall level of service, support and advice to help us develop the golf course in the way we wished.

“The process was admittedly a lengthy one but the ongoing feedback we had from the membership was invaluable to me in the decision-making process, particularly with regard to the high levels of presentation and finish right across the course. This ultimately showed us that the quality of cut from the John Deere machines was far superior and sharper looking.”

“We have quite undulating fairways, so the smaller QA5 cutting units on the fairway mower suit our terrain very well by getting easily into the dips and hollows,” adds Colin Powrie. “The new hand mowers are used on the 1st and 18th tees and the collars, so these are now nicely striped up for better presentation.”

Gordon Simpson admits John Deere would not have been his original number one choice, having never done a deal with the company before in his previous roles. However, he is now happy to state that everything the club experienced over the 20-month process of choosing a new supplier proved that he wanted to partner with John Deere as a brand and Double A as a local business.

“With the volume of kit that had to be replaced, it was always the case that the club would need to spread the investment over several years to make it more manageable,” says Gordon. “With all the work they put into the tender, John Deere and Double A simply stood out a mile, and we knew this was the manufacturer and dealer we wanted to partner with.

“We were looking for a long-term relationship with our supplier, which is why it took us so long to make the decision, but we certainly feel that we’ve picked the right route for us and our ambitions for the club.”

For more information, visit: www.JohnDeere.co.uk

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Vincent Tractors Expand Into Devon

/in , /by

Vincent Tractors Expand Into Devon: Vincent Tractors & Plant, a Cornish Kubota Dealership, is expanding into Devon and opening two new branches in Holsworthy and Smithaleigh.

The two new branches will focus on the full range of Kubota equipment – agriculture, groundcare and construction.  The Head Office for the expanded company will remain at Fraddon, with both of the new sites having a sales, parts and service departments offering customers local support.

Vincent Tractors Expand Into Devon

Paul Vincent, Managing Director of Vincent Tractors & Plant said “This is an incredibly exciting time in the company’s history.  Two of my sons, Nick and Alec have joined the company to help implement this expansion.  Nick being responsible for construction sales in Devon and Cornwall initially and Alec as our Financial Manager”.

“Over the past 52 years we have dealt predominantly with customers in Cornwall.  The opening of the two new branches will allow us to offer our award-winning level of expertise and customer service to customers in Devon.  Richard Felton will cover the new area for agricultural sales, while John Scott and Trevor Readwin will cover groundcare in the south and north respectively”.

Rob Edwards, Kubota’ Business Development Manager for Agriculture, said “We are very pleased to be working with Vincent Tractors & Plant on their expansion.  Paul and his team have a great reputation in Cornwall as a dealership that provides quality equipment and service to their customers.  We aim to help them bring this to Devon through the utilisation of our latest machinery and excellent aftersales support”.

The opening of the new depots will enable Vincent Tractors & Plant to supply and service Kubota’s complete range of high quality and innovative agricultural equipment to Devon’s farmers. This includes the recently launched flagship M7 range up to 170hp, as well as the extensive range of agricultural implements.

Kubota’s groundcare range includes walk behind, ride-on, out-front and zero turn mowers, as well as its industry leading compact tractors and its durable and rugged RTV utility vehicles.  Kubota’s range of BX Series, B1 Series and B2 Series sub-compact tractors are perfect for the Devon market as they are leaders in innovation, reliability and value for money.

Kubota’s excavator range, from the micro K008-3 (800kg) to the KX080-4 (8 tonne), continue to dominate the construction market with quality, performance and reliability.  This is a very important market to Kubota and Vincent Tractors & Plant welcomes customers both old and new to our Devon depots.

Vincent Tractors & Plant commenced trading in Devon as from 1st September 2018.  The official opening of the two new branches will be later in the year.

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.