Tag Archive for: To

SISIS Heading To FSB 2019

/in , , /by

SISIS Heading To FSB 2019: SISIS will be exhibiting at FSB Cologne, Germany from 5-8 November 2019 where the British manufacturer will be showcasing a range of market leading turf maintenance equipment for synthetic surfaces.

Visitors to the exhibition will able to locate SISIS in hall 10.2, Aisle A, Stand No. 038, and will have the opportunity to see the following products:

SISIS Heading To FSB 2019

SISIS Brush-Pro                                

The SISIS Brush-Pro is a ride-on brushing system comprising a pair of mid mounted oscillating units and three rear mounted brush units that that have been specifically designed for maintaining synthetic surfaces. The machine has been designed for maximum manoeuvrability and operator comfort which features an electric start, hydrostatic drive for forward/reverse and its brush combinations – oscillating for thorough periodic work and rear mounted brushes for more routine work.

SISIS Osca 3

The SISIS Osca 3 is a tractor mounted powered oscillating brush with a 1.9 meter working width and is equally effective when used on synthetic turf with sand or rubber infill. The two oscillating brushes stand the carpet fibres up and redistributes the infill evenly, minimising compaction on the surface and improving its performance – giving consistent playing characteristics while preventing pile damage caused by reduced infill levels.

A contributory factor to the reduction of compaction is that the Osca’s working width will use fewer passes than other more conventional drag brushes to complete a pitch. Its aggressive brushing action agitates the upper infill level of the surface from side to side as well as brushing forward, helping reduce surface compaction and encourage the fibres to stand up straight which reduces the risk of contamination, drainage problems and leaves a consistent playing surface across the whole pitch.

SISIS Twinplay with Flexicomb and straight brush

The SISIS team will also be showcasing the Twinplay Towed Implement Frame (TIF) and the Flexicomb and straight brush. The Twinplay frame is a single pass maintenance system which accepts two implements at any one time and the Flexicomb and straight finishing brush is recommended for both sand and rubber infill surfaces. The Flexicomb ensures even distribution of infill and lifts the carpet pile while the straight brush produces a smooth level and eye-catching presentation. For rubber crumb surfaces a more aggressive brushing is required and this can be achieved by adjusting the crossbar on the Flexicomb to stiffen the bristles.

As well as the products being on show, the experienced SISIS team will be on hand to advise on maintenance procedures and offer tips on how to prolong the life of synthetic playing surfaces.

For further information or a no obligation demonstration, please contact SISIS on 01332 824 777 or visit www.sisis.com

For more news, reviews and insightful views, you can follow SISIS on Twitter @SISISMachinery and like the company’s Facebook page – www.facebook.com/SISISMachinery. You can also view the latest SISIS videos by visiting www.youtube.com/SISISMachinery

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Ecogreen Screener To Launch At SALTEX

/in , , /by

Ecogreen Screener To Launch At SALTEX: King Feeders UK are pleased to announce the launch of their new Ecogreen compact mobile screener at Saltex 2019 in October.

A real breakthrough for landscaping and contracting groundscare businesses requiring compost and woodchip screening on the move, the screener can be legally towed behind a typical 4×4 pick-up, or similar vehicle, with a 3.5 tonne capacity. It can be built to be trailer loaded, or it can be trailed with its own axle and draw bar. The innovative design offers the option of standard legs, where it can be easily moved by a fork-lift, or the screener can be supplied with hydraulic legs.

Ecogreen Screener To Launch At SALTEX

The Ecogreen screener offers a simple, reliable and economic solution to a wide range of requirements, with a quick release screening drum and choice of meshes. The aggressive drum ensures fast, efficient operation with low running cost per tonne. The machine is easily driven by the PTO of a small compact tractor and it’s also available with diesel or electric drive.

The hopper comes with a steel feed conveyor, so there is no need for the continual adjustment required with a rubber belt. The screener is compact for easy access into confined spaces, robust in construction, and suitable for one-man operation.

Elevators are available for trommel fines removal after screening and separation and there is an optional brush for wet material.  The Ecogreen screener can be easily incorporated into a bunker system and designed to individual specification if required.

King Feeders will be offering special 0% finance deals at Saltex and for the first six months of sales, subject to status, with a 50% deposit then nothing to pay for 2-years and no interest on the payment balance. King Feeders have over fifty years in the machinery industry, with twenty-three years in green waste products. The company provides national service and support.

A number of other Ecogreen machines in the range will be on display at Saltex. Come and meet us on Stand No. H085 at Saltex and call us on (+44)01260 223273.  www.ecogreencomposting.co.uk

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Major Rollermower To Debut At SALTEX

/in , , , /by

Major Rollermower To Debut At SALTEX: Phil Cole at Cotswold Turf Care knows a good mower when he sees one.

“The MAJOR Swift is a great performer and always leaves an excellent finish,” Phil nods approvingly. He’s been maintaining the grounds at Cirencester Park Polo Club for nearly 30 years so is particular that the turf provides a safe yet fast playing surface.

Major Rollermower To Debut At SALTEX

The exceptional double-wing design of the new MJ71-730T increases productivity and efficiency without compromising on the quality of cut. “The front and rear rollers ensure we leave a level and striped finish at precisely the right height of cut, every time. It levels the ground back down to its original condition after we’ve had eight or ten horses running over it.”

“Because it’s made of high-strength Strenx® steel, it’s lightweight and avoids compaction, which is beneficial to maintain the best ground condition,” Phil continues. “For a big machine, it is far more manoeuvrable than I expected – it can turn on a sixpence! It is also a very low consumer of power, therefore more economical with fuel.”

“We have a small team, so a reliable wide area mower is essential to alleviate time pressures and reduce costs,” continues Phil. He and his team at Cotswold Turf Care manage equestrian grounds, football and rugby pitches and golf courses, as well as parks across Gloucestershire. The team cuts a minimum of 6000 acres throughout the year. “The 7.3m Swift wings fold to 2.60m, making it great for safe road transportation between multiple sites. It’s about the largest make available that can be safely transported on the road.”

The trailed versions display the MAJOR qualities of durability and low maintenance. “There are no belts – just a strong and simple, heavy-duty driveline with a shear-bolt in the PTO drive,” Phil continues. “The MAJOR Swift is galvanised so it’s going to last us a long time!”

The larger units also have rubber encasing the hinges of each arm. This protects the joints while adding mobility for each wing over uneven ground for a more consistent cut.

Looking the part is just as important as playing the part. “Players and spectators have commented on how good the grounds look,” concludes Phil. “At a recent board meeting, the committee members commented very favourably about our grass cutting and the playing surface.”

See the new 7.3m Swift roller mower at the MAJOR stand (J112) at Saltex 2019 from Oct 30-31 at the NEC Birmingham.

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

AriensCo To Make Zero-Turns In UK

/in , , /by

AriensCo To Make Zero-Turns In UK: AriensCo has announced that production of Ariens brand zero-turn mowers will commence at the company’s factory in Great Haseley, Oxfordshire.

It’s believed these will be the first zero-turns to be manufactured in Europe. AriensCo reports seeing an exceptional growth in demand for zero-turn mowers in the UK and Europe. This follows similar trends in the US, where sales have more than tripled since 2003 as the popularity among users has soared. According to industry analysis, zero-turn sales in Europe have grown more than 30% over the last four years, making them the fastest growing category of ride-on mowers and third fastest in the lawn and garden power equipment sector.

AriensCo To Make Zero-Turns In UK

“Sales of zero-turns in Europe have experienced exceptional growth over the past three years,” says Darren Spencer, Vice President – EMEA and Asia. “AriensCo has experienced this growth in numerous markets and, based upon extensive research with our distribution partners, we expect the growth to continue. This industry analysis points to the many opportunities to be met by producing zero-turns at our Great Haseley plant. We currently sell into ten different countries within Europe and aim to increase our European footprint in 2020. Future growth will accelerate as the benefits of zero-turn mowers are understood by customers. Zero-turn users are experiencing increased speed of cut and greater versatility over tractors and out-fronts.”

During 2019 AriensCo continues to make significant investment in the Oxfordshire factory in preparation for zero-turn production, including a new production line, fixtures and tooling. The UK will be manufacturing CE zero-turns for European markets only and will initially be producing the IKON, APEX and ZENITH models. Close collaboration with the US will be maintained to ensure products match up to Ariens’ reputation for manufacturing quality.

Zero-turn production in the UK is seen to offer significant advantages, allowing for rapid delivery and improved availability throughout the year. There is also potential for zero-turns to be adapted with features and benefits to meet local market needs.  Increased utilisation of the manufacturing facility at Great Haseley will provide operational cost benefits and will generate a number of new jobs for the area. The first zero-turn to come off the production line will be at the end of October.

For further information or to become a dealer for AriensCo, please call 01844 278800 or email uksales@ariensco.com

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

GKB To Attend SALTEX 2019

/in , , /by

GKB To Attend SALTEX 2019: GKB are delighted to confirm that they will be attending Saltex Turf Management Show 2019. This year’s show takes place at the NEC Birmingham from the 30th to 31st October 2019.

With an impressive line-up of turf machinery on display, from brushing and cleaning artificial turf to tackling surface drainage, infill removal and sand spreading, Saltex 2019 is a show not to miss. Aspiring to develop machines that consistently meet the exact expectations and demands of the customer, GKB is proud to be showcasing a range of our durable and reliable turf maintenance machines at this year’s show.

GKB To Attend SALTEX 2019

Tom Shinkins, Operations Manager, said “It’s great to be at Saltex again. It’s a real opportunity to speak to Turf professionals and showcase our products for the 4th year in a row.”  Tom adds, “The show has gone from strength to strength. It delivers a good mix of distributors and end users.” Visit us on stand H051 to book your demonstrations.

For more on GKB Machines and their impressive range of machinery for natural, hybrid and synthetic turf, visit www.gkbmachines.com or contact us on 01778 348864.

GKB To Attend SALTEX 2019

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.