Tag Archive for: Replace

Ventracs replace ageing fleet at Ladbrook Park Golf Club

/in , /by

Ventracs replace ageing fleet at Ladbrook Park Golf Club: Ladbrook Park Golf Club, situated in the Warwickshire countryside near Tanworth-in-Arden, has put its trust in Ventrac and taken delivery of FOUR Ventrac 4520 all-terrain compact tractors and 13 attachments to maintain their prestigious 1908 Colt-designed course.

Kevin Fellows has been the course manager for 38 years, having joined the club in 1985 from nearby Shirley Golf Club. He was appointed to his current position in 1994.

Ventracs replace ageing fleet at Ladbrook Park Golf Club

Ventracs replace ageing fleet at Ladbrook Park Golf Club

Commenting on the club’s decision to take this route, he said,

“With the exception of our fine turf areas, the majority of the course is now maintained with Ventrac equipment. It fits in with our agronomic requirements and does everything apart from fine turf and aeration. For all other areas – approaches, fairways, semi, rough, our ecology areas, transport, ditching, haulage – the Ventrac system fits perfectly. At the moment we have everything we need. It fits our current maintenance plan; tomorrows objectives and our longer-term direction.

“Selling it to the board of directors was not an issue. The initial thinking was to identify machines for replacement on a like-for-like basis and then progressively, over the next few years, replace and update as necessary. The alternative was to take the Ventrac route. Fortunately, the Finance director and board were keen to fund our replacement programme, with the support of the Greens committee, whichever direction we chose.

“When the cost options were put on the table it became a bit of a no-brainer. It is difficult to justify spending close to £100,000, or thereabouts, on a dedicated mower to cut rough, which does nothing else apart from macerate leaves and then put in the shed at the end of October and let it sat there, doing nothing for 3-4 months.

“I spoke with the club’s Finance and Greens directors in conjunction with the greens committee and we arranged a demo with a couple of Ventracs and a selection of implements. After some training and machine familiarisation, Jon Lewis, Price Turfcare’s regional sales manager, who I’ve known for years, left it with us so we could thoroughly evaluate it on our course. When you’re looking at new equipment you need to bring your team with you. You sit back and listen to what they say and sitting there one lunchtime, there was a comment which really sticks in my mind; one of the guys said ‘it’s becoming increasingly difficult to say no to.’ And he was right, because it suited our course. You’ve got invest in machinery that suits your course.”

“It was a big commitment to swap out our existing fleet and go, almost exclusively, with Ventrac. Once we started to look, we became increasingly discontent with some of the market forces; supply lines and cost were major considerations. As a course manager you have to think laterally, so I asked myself is there a better way of doing this? Covid caused a reset in thinking; prior to the pandemic a lot of clubs were committed to one manufacturer or another. We were principally a one manufacturer machinery operation.

“I was looking for something that gave us more versatility and began by looking at compact tractors from various manufacturers. Then, by pure chance Jon Lewis dropped by one afternoon with a trailer of Ventrac equipment. Naturally enough I had a look and next morning Jon gave me a brochure. And the rest is history!

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Maintain or replace?

/in /by

Maintain or replace?: Bailoy Director, Adam Lovejoy, offers some helpful advice on whether you should invest in new or extend the live of your existing equipment.

Nobody wants to spend money unnecessarily, so it is important that any spending is on the correct product or service. But how do you know what that is, who do you ask and how do you know the information is correct?

Maintain or replace?

Maintain or replace?

If you have a little more understanding of how your system is put together, then it should be possible to narrow down your options.

Whether you have a clockwork controller or a computer-based controller, initially, the complete system would have been designed by an irrigation consultant, or an irrigation contractor. When that system was designed, it would have specified the following: A pump, pipe network, cable network, sprinklers, and a controller. Each one of these component parts would have been specified to work together for reliable operation of the system.

Over the years, these components will have required replacing, repairing, or upgrading. Sometimes the original product has been discontinued but there will often be a direct replacement. But why install a direct replacement when there is an improved component on the market?

Depending on the component in question, this is often where mistakes are made that can cause a chain reaction. Apart from must-do maintenance like pipe bursts or cable breaks, decisions on improving a system are often decided on visibility.

What do I mean by this? Things that can be more easily justified logically and seen by management, committees, or members.

The main contender is often sprinklers. With new technology giving improved coverage, better throw, and increased flow why would you not look at them – they can be seen around a green and often manufacturers will give you some free samples to try out.

Most new sprinklers have increased flow rates that can deliver more water in half the time. But that new sprinkler is fed by the existing pump and pipe network and you now require that network to deliver maybe double the previous flow. Maybe the pipes and pump can deliver that but what if they can’t?

So that’s it, you can’t benefit from new technology unless you replace the entire system? Not necessarily!

We see so many sites running computers that are over 10 years old with software even older. And with that old set up the database containing critical site information is also likely to be out of date. But as previously mentioned, they are not visual items, so to spend money on them is difficult to justify.

Maintain or Replace?

/in , /by

Maintain or Replace?: Nobody wants to spend money unnecessarily, so it is important that any spending is on the correct product or service. But how do you know what that is, who do you ask and how do you know the information is correct.

If you have a little more understanding of how your system is put together, then it should be possible to narrow down your options.

Maintain or Replace?

Maintain or Replace?

Whether you have a clockwork controller or a computer-based controller, initially, the complete system would have been designed by an irrigation consultant, or an irrigation contractor. When that system was designed, it would have specified the following: A pump, pipe network, cable network, sprinklers, and a controller. Each one of these component parts would have been specified to work together for reliable operation of the system.

Over the years, these components will have required replacing, repairing, or upgrading. Sometimes the original product has been discontinued but there will often be a direct replacement. But why install a direct replacement when there is an improved component on the market?

Depending on the component in question, this is often where mistakes are made that can cause a chain reaction. Apart from must do maintenance like pipe bursts or cable breaks, decisions on improving a system are often decided on visibility.

What do I mean by this? Things that can be more easily justified logically and seen by management, committees, or members. The main contender is often sprinklers. With new technology giving improved coverage, better throw, and increased flow why would you not look at them (logical). They can be seen around a green and often manufacturers will give you some free samples to try out. (visual both on the course and financially).

Most new sprinklers have increased flow rates that can deliver more water in half the time. But that new sprinkler is fed by the existing pump and pipe network and you now require that network to deliver maybe double the previous flow. Maybe the pipes and pump can deliver that but what if they can’t? Initially, the result will be bad application but more importantly you have increased the stress on your pump and pipe network that may well take it beyond its original design parameters.

So that’s it, you can’t benefit from new technology unless you replace the entire system. Not necessarily!

If you are using a clockwork controller, you are going to be more limited. Any increased flows will have to be manually calculated so they do not exceed the parameters of the design. This may increase the irrigation window, as you will only be able to run a limited number of sprinklers at the same time, but maybe you can live with that.

If you are running a computer-based controller then you have options.

Maintain or Replace?

Maintain or Replace?

Earlier, I mentioned visibility. Below are examples of non-visible items but these can make a big difference to the reliability and performance of your system.

Older controllers may be more basic but, they are likely to have upgrade options. Remember, the controller is also made up of different parts. There is the main box on the wall which contains all the electrical parts, the software running the system and the computer.

The main box maybe be a few years old but, in our opinion, there is no major advantage to replacing this if the software can be upgraded. The software, and the reliability of the computer it is installed on, is the workhorse behind any computer-based system and can often be upgraded quickly to give the user new features and cater for new technology.

We see so many sites running computers that are over 10 years old with software even older. And with that old set up the database containing critical site information is also likely to be out of date. But as previously mentioned, they are not visual items, so to spend money on them is difficult to justify.

To see just how important your data is, see previous articles we have written and published in TurfMatters:

  1. Check your data. Don’t jump to replace your system.
  2. Data checked. Next step Hydraulic tree

We distribute and support the GTI Gemini and GTI Trident range of controllers. Contact us on 0044 (0) 208 897 0125 or visit our web site www.Bailoy.com

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter and Instagram for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.

Gillingham To Replace Pitch

/in , , /by

Gillingham To Replace Pitch: Gillingham have taken the decision to replace their current playing surface with a hybrid pitch, leading to the rescheduling of two home fixtures.

The surface of the Priestfield pitch has been problematic for some time and the club have now decided to act.

Gillingham To Replace Pitch

Their home game against Peterborough United is the last on the current surface before renovation work begins, this Monday.

Chairman Paul Scally confirmed the work is to be undertaken and that negotiations are underway about moving the home league match against Blackpool and finding a new venue for their Checkatrade Trophy game against Tottenham’s under-21s.

Mr Scally said: “Work is scheduled to begin on Monday.

“As a result of the work, which will take little over a fortnight, our home match against Blackpool will have to be rearranged, while our match against Totteham in the Checkatrade Trophy will have to be played at another venue.”

Manager Steve Lovell was delighted with the news.

He said: “It’s fantastic news for us as coaching staff and our players that we will have a brilliant pitch to play on in the next couple of weeks. The type of football I like to play will be one that we will hopefully be able to produce at home, as well as away.”

Click here to read the original article

For the latest industry news visit turfmatters.co.uk/news

Get all of the big headlines, pictures, opinions and videos on stories that matter to you.

Follow us on Twitter for fun, fresh and engaging content.

You can also find us on Facebook for more of your must-see news, features, videos and pictures from Turf Matters.